East Germany's Trabant, a car buyers often waited over ten years for, had cotton and resin body panels.
What the Reel says
East Germany's Trabant, a car buyers often waited over ten years for, had cotton and resin body panels.
That's why Germans nicknamed it "racing cardboard."
But it wasn't a joke.
In the early 1950s, East Germany made no steel of its own, and a Western embargo kept sheet metal out.
So engineer Wolfgang Barthel took leftover Soviet cotton, too poor to spin into cloth, and soaked it in resin.
Each panel was then baked hard in a hot press, like plastic.
Made by the thousands, those panels cost about half as much as steel.
Under the skin sat a metal frame, and the panels shrugged off dents, but could tear.
A country with no steel to spare used mill scraps to build about 3 million cars.
Sources and assumptions
- auto motor und sport: Auto-Legende Trabant (1957-1991): Technik, Design, Preis: Duroplast = five layers of cotton fibre and phenolic resin pressed with 180 °C steam and 400 t (46% cotton, 52% resin); 'Die DDR verfügte in den frühen 50er-Jahren über keine eigene Stahlproduktion'; cost advantage of Duroplast over steel 2:1 at 160,000 cars a year; body = steel skeleton plus Duroplast; P 601 from July 1964, 595 cc, 26 hp from December 1968; 2,818,547 P 601s built; production over 3 million in total; 10-year waits (checked 2026-11-13)
- Deutsche Handwerks Zeitung: Plaste-Erfinder Barthel blickt zurück (interview with Wolfgang Barthel): Wolfgang Barthel, Sachsenring development engineer, invented Duroplast; a mix of synthetic resin and long-fibre cotton waste; 'Die DDR stand auf der Embargo-Liste des Westens und deshalb gab es kein Blech'; pressed at 188 °C; last Trabant left the line on 30 April 1991, 3,069,099 built in total (checked 2026-11-13)
- Auto Bild: Extratour Trabant: East Germany lacked the material for all-metal cars; Russian cotton that couldn't be made into textiles went to Zwickau; up to 12 cotton fleece layers; workers hand-cut panel shapes; panels baked in presses 'Acht Minuten bei 188 Grad'; steel sheet skeleton underneath; Duroplast panels didn't dent but could tear; about 30 patents (checked 2026-11-13)
- deutschland.de: From a laughing stock to cult status: Duroplast made from inexpensive cotton fibre imported from the Soviet Union, soaked in plastic and pressed; 'In the socialist economy steel was simply too valuable'; more than three million built; last on 30 April 1991; many buyers waited more than ten years (checked 2026-11-13)
- Radio Free Europe/Radio Liberty: The Trabant turns 60: Duroplast made by soaking waste cotton in plastic resin and squeezing it in a hot press; waits often more than a decade; air-cooled two-cylinder two-stroke engine; car weighed just over 600 kg; cost around a year's salary (checked 2026-11-13)
- Autohaus: 70 Jahre P 70 und Trabant: Rennpappe, Duroplastbomber und Sachsenporsche: P 70 (1955) first used Duroplast; the post-war steel shortage led to the cotton-based material; 'Rennpappe' nickname; 601 got 326 series changes and 156 body changes 1964-1988 but no full redesign (checked 2026-11-13)
- Firmenauto: Trabant, Geschichte eines deutschen Kultautos: Duroplast = phenolic resin reinforced with cotton short fibres; the post-war steel shortage led to it; nearly 3.1 million Trabants in total (checked 2026-11-13)
- August Horch Museum Zwickau: permanent exhibition: The museum shows the production line for the Trabant's patented Duroplast body (identifies the machinery in the Commons photos) (checked 2026-11-13)
Assumptions:
- Total production is given as 'about 3 million' because the sources differ (3,069,099 in the Barthel interview, 'nearly 3.1 million' in Firmenauto, 'more than three million' on deutschland.de; one Commons caption says 3,051,385).
- The last car is dated 1991 only: sources say 30 April 1991 (DHZ, deutschland.de) or May 1991 (Firmenauto).
- Pressing temperature is given as 188 °C (Auto Bild, Barthel interview); auto motor und sport gives 180 °C steam, which may describe a different step. The press time of eight minutes comes from Auto Bild alone.
- Waiting time is given as 'often more than ten years', which all three sources support; stories of 13-15 or 40-year waits are left out as unverified.
- 'Duroplast can't rust' follows from it being a cotton-and-resin plastic, not steel. The steel skeleton underneath can rust, so the post must not say the car can't rust.
- The cost figure (half the cost of steel) is auto motor und sport's 2:1 ratio for a planned 160,000 cars a year.
Photos:
- Photo: Adam Jones, Ph.D., CC BY-SA 3.0, Wikimedia Commons (cropped)
- Photo: Derbrauni, CC BY 4.0, Wikimedia Commons (cropped)
- Photo: Derbrauni, CC BY 4.0, Wikimedia Commons (cropped)
- Photo: Luc106, Public domain, Wikimedia Commons (cropped)
- Photo: High Contrast, CC BY 3.0 de, Wikimedia Commons (cropped)
- Photo: Renée Kools, CC BY 4.0, Wikimedia Commons (cropped)


