Honda's first sports car drove its rear wheels with motorcycle chains.
What the Reel says
Honda's first sports car drove its rear wheels with motorcycle chains.
The 1963 S500's engine could spin 9,500 times a minute, too fast to drive the car.
Even after the gearbox, the shaft still turned about six times for every one turn of the wheels.
However, 1960s machines couldn't cut one gear pair with that big a reduction.
So Honda split it: the usual center gears, then a second reduction by chain on each side.
Each chain ran inside a sealed arm holding the wheel, like on Honda's motorcycles.
But that setup made the tail rise under acceleration and sink under braking.
In 1966, the S800 switched to a normal rear axle.
Honda's motorcycle know-how solved a car problem, but it cost the S500 its stable rear end.
Sources and assumptions
- Motor-Fan TECH (J.J. Kinetickler, 2022-08-19): 「加速で浮き、減速で沈む」ユニークなリヤサスペンション!ホンダS500: S500 rear wheels driven by chains housed inside the trailing arms; 'mechanically the same as a motorcycle's chain-drive swing arm'; total reduction 5.887 could not be made as a single final drive with period machine tools; chain second reduction 28/15 = 1.867; rear lifts under acceleration (about 231% anti-squat) and sinks under braking; spare tire placed between the suspension arms for a bigger trunk (checked 2026-11-10)
- Honda Global: Trajectory of Challenges, 1960s: 1963: T360 k-truck is Honda's first automobile product; 1963: S500 compact sports car launched; 1964: S600 launched; 1966: S800 launched (checked 2026-11-10)
- Japanese Wikipedia: ホンダ・S500: S500 introduced October 1963; 531 cc DOHC inline-4, 44 PS at 8,000 rpm; independent rear suspension with roller-chain drive; chain drive continued until partway through the S800 (checked 2026-11-10)
- Wikipedia: Honda S600: S600 launched March 1964, 606 cc, 57 hp at 8,500 rpm; each rear wheel driven by chain(s) in a pivoting, sealed case with oil-bath lubrication (checked 2026-11-10)
- Wikipedia: Honda S800: Early S800s kept chain drive and independent rear suspension (752 roadsters, 242 coupes), then switched to a conventional drive shaft and live axle; 791 cc, 70 hp at 8,000 rpm (checked 2026-11-10)
- Honda UK: The Honda heritage heroes: S500 was a small two-seat roadster that revved to 9,500 rpm, with a twin-cam engine and independent suspension (checked 2026-11-10)
- AutoWeek, 19 Oct 1987, reprinted at rememberroad.com: S500 final drive was by a pair of chains; on the S800 the chains were replaced by a hypoid bevel drive and a live rear axle located by four trailing arms and a Panhard rod (checked 2026-11-10)
Assumptions:
- The 5.887 total reduction and 28/15 chain ratio are the S500 figures in Motor-Fan's analysis; the S600 and S800 used different ratios.
- 'Machine tools of the time couldn't cut that ratio in one step' is Motor-Fan's technical explanation, not a quote from Honda; Honda's own pages online don't state a reason. Frame it as the engineering reason, not as Honda's statement.
- Why Honda dropped the chains on the S800 is not confirmed by a primary source (secondary sources suggest export-market concerns); the Reel should say only that Honda switched to a conventional axle in 1966, not why.
- S500 production figures conflict between sources (1,363 vs about 500 registered in Japan); leave the production count out.
- Rear rising under acceleration is from Motor-Fan's geometry analysis (anti-squat over 100%).
Photos:
- Photo: baku13, CC BY-SA 2.1 jp, Wikimedia Commons (cropped)
- Photo: Kzaral, CC BY 2.0, Wikimedia Commons (cropped)
- Photo: Iwao from Tokyo, Japan, CC BY 2.0, Wikimedia Commons (cropped)
- Photo: TTTNIS, CC0, Wikimedia Commons (cropped)
- Photo: Maysy, CC BY-SA 4.0, Wikimedia Commons (cropped)
- Photo: Erich Mayer at de.wikipedia, Public domain, Wikimedia Commons (cropped)


